holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 5A - SERVICE AND PARK BRAKING SYSTEMS
  • 1. GENERAL INFORMATION
    • 1.1 GENERAL DESCRIPTION
    • 1.2 MASTER CYLINDER
      • DESCRIPTION
      • CONSTRUCTION
      • OPERATION
    • 1.3 PROPORTIONING VALVE OPERATION
      • ALL EXCEPT UTILITY
      • UTILITY LOAD SENSING PROPORTIONING VALVE
    • 1.4 FRONT AND REAR BRAKES
  • 2. MINOR SERVICE OPERATIONS
    • 2.1 SERVICE NOTES AND CAUTIONS
    • 2.2 PARK BRAKE CABLE, ADJUST
    • 2.3 BRAKE FLUID LEVEL CHECK
    • 2.4 BRAKE SYSTEM BLEED
    • 2.5 BRAKE FLUID, CHANGE
    • 2.6 BRAKE PAD WEAR, CHECK
    • 2.7 BRAKE PADS, REPLACE
      • BRAKE PAD REMOVAL
      • FRONT BRAKE PAD INSTALLATION
      • REAR BRAKE PAD INSTALLATION
      • BRAKE PAD BEDDING-IN PROCEDURE
    • 2.8 BRAKE PEDAL ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 2.9 PARK BRAKE LEVER
      • REMOVE
      • REINSTALL
    • 2.10 PARK BRAKE WARNING LAMP SWITCH
      • REMOVE
      • INSPECT
      • REINSTALL
    • 2.11 FRONT PARK BRAKE CABLE
      • REMOVE
      • REINSTALL
    • 2.12 REAR PARK BRAKE CABLE/S
      • REMOVE
      • REINSTALL
    • 2.13 FRONT BRAKE HOSE
      • REMOVE
      • REINSTALL
    • 2.14 REAR CALIPER BRAKE HOSE
      • REMOVE
      • REINSTALL
    • 2.15 REAR BRAKE HOSE
      • REMOVE
      • REINSTALL
    • 2.16 BRAKE BOOSTER HOSE & VALVE ASSEMBLY – V6 ENGINE
      • REPLACE
    • 2.17 BRAKE BOOSTER HOSE & VALVE ASSEMBLY – GEN III V8 ENGINE
      • REPLACE
    • 2.18 LOAD SENSING PROPORTIONING VALVE – UTILITY
      • REMOVE
      • REINSTALL
    • 2.19 BRAKE PRESSURE DIFFERENTIAL WARNING SWITCH
      • REMOVE
      • INSPECT
      • REINSTALL
  • 3. MAJOR SERVICE OPERATIONS
    • 3.1 MASTER CYLINDER
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.2 BRAKE BOOSTER
      • REMOVE
      • REINSTALL
    • 3.3 BRAKE CALIPER (FRONT & REAR)
      • REMOVE
      • DISASSEMBLE
      • CLEAN AND INSPECT
      • REASSEMBLE
      • REINSTALL
    • 3.4 FRONT BRAKE DISC
      • REMOVE
      • INSPECT
      • BRAKE DISC AND HUB INDEXING PROCEDURE
      • REINSTALL
    • 3.5 REAR BRAKE DISC
      • REMOVE
      • INSPECT
      • BRAKE DISC AND HUB INDEXING PROCEDURE
      • REINSTALL
    • 3.6 PARK BRAKE LINING WEAR, CHECK
    • 3.7 PARK BRAKE SHOE, ADJUST
    • 3.8 PARK BRAKE SHOE
      • REMOVE
      • REINSTALL
    • 3.9 FRONT DISC BRAKE SHIELD
      • REMOVE
      • REINSTALL
    • 3.10 REAR DISC BRAKE SHIELD
      • REMOVE
      • REINSTALL
  • 4. DIAGNOSIS
  • 5. SPECIFICATIONS
  • 6. TORQUE WRENCH SPECIFICATIONS
  • 7. SPECIAL TOOLS